A
-
Abkhezr, A.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Aghdami, A.M.
Simulation of Pultrusion Manufacturing Process of Glass/Polyester Composites [Volume 23, Issue 4, 2010, Pages 323-333]
-
Ahmadjo, S.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Amiri, E.
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Amjadi, M.
The Role of Reaction Parameter on Leaching of SiO2 Doped Nafion Membrane for Use in High Temperature PEM Fuel Cells [Volume 23, Issue 2, 2010, Pages 111-120]
-
Arabi, H.
Process Conditions in Preparation of MgCl2 Adduct on Crystalline Structure of the Support in ZN Catalyst [Volume 23, Issue 2, 2010, Pages 171-179]
-
Arabi, H.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
As’habi, L.
Evolution of Co-continuous Morphology along the Screw Length in a Co-rotating Twin-screw Extruder and Its Effect on Impact Strength of Compatibilized PA6/ABS Blend [Volume 23, Issue 1, 2010, Pages 41-52]
-
Atai, M.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Atashi, Hossein
Failure Optimization and Curing Properties of a Passenger Tire Tread Compound [Volume 23, Issue 3, 2010, Pages 187-201]
-
Azizi, A.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
B
-
Bagheban Kochak, E.
Extraction of Micro- and Nano-Fibrils from Nylon 6/Polypropylene Grafted with Maleic Anhydride/Polypropylene Blended Films [Volume 23, Issue 2, 2010, Pages 155-169]
-
Bagheri-Khoulenjani, S.
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of
Gelatin/Chitosan/Nanohydroxyapatite Microspheres [Volume 23, Issue 6, 2011, Pages 487-498]
-
Bagheri Marandi, G.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Bagheri Marandi, G.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Baharvand, H.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Bakhshandeh, G.R.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Bakhshandeh, G.R.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Bakhshandeh, G.R.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Barikani, M.
The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration
Composite Membranes Based on Polyether Sulfone [Volume 23, Issue 3, 2010, Pages 213-222]
-
Barzin, J.
The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration
Composite Membranes Based on Polyether Sulfone [Volume 23, Issue 3, 2010, Pages 213-222]
-
Beagom Mokhtari-Hosseini, Z.
Enhancement of Poly(β-hydroxybutyrate) Production from Methanol by Methylobacterium Extorquens Using Mixed Substrates [Volume 23, Issue 5, 2011, Pages 397-404]
-
Beheshty, M.H.
Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins [Volume 23, Issue 5, 2011, Pages 415-422]
-
Behnamghader, A.A.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Beteshobabrud, R.
The Role of Solvent on Radiation Degradation and Antibacterial Activity of Chitosan Against Pectobacterium Carotovorum [Volume 23, Issue 4, 2010, Pages 305-310]
-
Boohendi, H.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Boohendi, H.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
D
-
Dabirian, Farzad
Microstructural Characterization of Aligned PAN Nanofibers Collected by Hot Air Flow in Electrospinning Method [Volume 23, Issue 4, 2010, Pages 271-281]
-
Daneshgar, M.
The Effects of Temperature, Initiator and Stabilizer on Polymer Particle Size in Suspension Polymerization of Styrene [Volume 23, Issue 6, 2011, Pages 499-507]
E
-
Ebadi Amooghin, A.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Ebadzadeh, T.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Eikani, M.H.
The Role of Reaction Parameter on Leaching of SiO2 Doped Nafion Membrane for Use in High Temperature PEM Fuel Cells [Volume 23, Issue 2, 2010, Pages 111-120]
-
Enayati, M.S.
Production of Polystyrene Open-celled Microcellular Foam in Batch Process by Super Critical CO2 [Volume 23, Issue 3, 2010, Pages 223-234]
-
Entezami, A. A.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Esfandeh, M.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Eshaghi, H.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Esmizadeh, E.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Etemadi, A.H.
Finite Element Analysis and Footprint Determination of a Bias Truck Tire under Vertical Static Load Using Global/Local Method [Volume 23, Issue 3, 2010, Pages 247-254]
-
Etrati-Khosroshahi, M.
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of
Gelatin/Chitosan/Nanohydroxyapatite Microspheres [Volume 23, Issue 6, 2011, Pages 487-498]
F
-
Faezipour, M.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Fallahi, E.
Extraction of Micro- and Nano-Fibrils from Nylon 6/Polypropylene Grafted with Maleic Anhydride/Polypropylene Blended Films [Volume 23, Issue 2, 2010, Pages 155-169]
-
Famili, M.H.N.
Production of Polystyrene Open-celled Microcellular Foam in Batch Process by Super Critical CO2 [Volume 23, Issue 3, 2010, Pages 223-234]
-
Feyz, E.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
G
-
Ghafarzade Zare, H.
Investigating Some Characteristics of Biocomposites Prepared from Chemically Purified Date Palm Fibers [Volume 23, Issue 6, 2011, Pages 467-474]
-
Ghanbari, D.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Ghasemi, A.R.
Analytical and Numerical Studies of the Effect of Impact Forces on Polymer/Clay Nanocomposites [Volume 23, Issue 3, 2010, Pages 235-245]
-
Ghasri, M.A.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Ghazanfari Moghaddam, A.
Investigating Some Characteristics of Biocomposites Prepared from Chemically Purified Date Palm Fibers [Volume 23, Issue 6, 2011, Pages 467-474]
-
Ghoreishy, M.H.R.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Ghoreishy, M.H.R.
Finite Element Analysis and Footprint Determination of a Bias Truck Tire under Vertical Static Load Using Global/Local Method [Volume 23, Issue 3, 2010, Pages 247-254]
-
Ghoreishy, M.H.R.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Gorji, B.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
H
-
Haddadi, V.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Haddadi-Asl, V.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Haddadi-Asl, V.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Haghighat, H.R.
Single Vacuum Bagging and Autoclave Curing System Influence on Physical and Mechanical Properties of Phenolic Composites [Volume 23, Issue 6, 2011, Pages 509-518]
-
Haghighat Kish, M.
Extraction of Micro- and Nano-Fibrils from Nylon 6/Polypropylene Grafted with Maleic Anhydride/Polypropylene Blended Films [Volume 23, Issue 2, 2010, Pages 155-169]
-
Haji Hosseini, M.
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Hamzeh, Y.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Hashemipour Rafsanjani, H.
Investigating Some Characteristics of Biocomposites Prepared from Chemically Purified Date Palm Fibers [Volume 23, Issue 6, 2011, Pages 467-474]
-
Hatamzadeh, M.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Hojjati Emami, Sh.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Hosseini Ravandi, S.Abdolkarim
Microstructural Characterization of Aligned PAN Nanofibers Collected by Hot Air Flow in Electrospinning Method [Volume 23, Issue 4, 2010, Pages 271-281]
J
-
Jafari, S.H.
Evolution of Co-continuous Morphology along the Screw Length in a Co-rotating Twin-screw Extruder and Its Effect on Impact Strength of Compatibilized PA6/ABS Blend [Volume 23, Issue 1, 2010, Pages 41-52]
-
Jafari, S.H.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Jahani, Y.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Jalali Torshizi, H.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Jalilian, S.M.
Microstructural Study on Polyvinyl Chloride by One and Two Dimensional Nuclear Magnetic Resonance Spectroscopy Methods [Volume 23, Issue 4, 2010, Pages 311-321]
-
Janani, H.
Production of Polystyrene Open-celled Microcellular Foam in Batch Process by Super Critical CO2 [Volume 23, Issue 3, 2010, Pages 223-234]
K
-
Kabiri, K.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Kabiri, K.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Kalteh, N.
Process Conditions in Preparation of MgCl2 Adduct on Crystalline Structure of the Support in ZN Catalyst [Volume 23, Issue 2, 2010, Pages 171-179]
-
Kargari, A.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Karimi, A.H.
Analytical and Numerical Studies of the Effect of Impact Forces on Polymer/Clay Nanocomposites [Volume 23, Issue 3, 2010, Pages 235-245]
-
Katbab, A.A.
Effect of the Compatibilizer Upon the Properties of Styrene-butadiene Rubber Organoclay Nanocomposites [Volume 23, Issue 1, 2010, Pages 65-74]
-
Kazemnejad Lili, A.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Khavanin, A.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Khayyatan, F.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Khonakdar, H.A.
Evolution of Co-continuous Morphology along the Screw Length in a Co-rotating Twin-screw Extruder and Its Effect on Impact Strength of Compatibilized PA6/ABS Blend [Volume 23, Issue 1, 2010, Pages 41-52]
-
Khoylou, F.
The Role of Solvent on Radiation Degradation and Antibacterial Activity of Chitosan Against Pectobacterium Carotovorum [Volume 23, Issue 4, 2010, Pages 305-310]
M
-
Mashak, A.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Massoumi, B.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Mazinani, S.
Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins [Volume 23, Issue 5, 2011, Pages 415-422]
-
Mirabedini, S.M.
Staining Behavior of an Anti-Graffiti Polyurethane Clear Coating against Accelerated Weathering Test [Volume 23, Issue 4, 2010, Pages 283-291]
-
Mirshokraie, S.A.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Mirzadeh, H.
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of
Gelatin/Chitosan/Nanohydroxyapatite Microspheres [Volume 23, Issue 6, 2011, Pages 487-498]
-
Mirzapour, M.A.
Single Vacuum Bagging and Autoclave Curing System Influence on Physical and Mechanical Properties of Phenolic Composites [Volume 23, Issue 6, 2011, Pages 509-518]
-
Mobedi, H.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Moghadassi, A.R.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Mohseni, M.
Staining Behavior of an Anti-Graffiti Polyurethane Clear Coating against Accelerated Weathering Test [Volume 23, Issue 4, 2010, Pages 283-291]
-
Mohseni, Mohsen
A Study of UV Resistance of a Water-based Polyurethane Lacquer Containing Nano Ceria [Volume 23, Issue 6, 2011, Pages 441-454]
-
Mohseniyan, S.H.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Mortazavi, M.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Mortazavi, S.B.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
N
-
Nademi, M.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Naderi, G.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Naderi, G.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Naderi, G.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Naderi, N.
Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins [Volume 23, Issue 5, 2011, Pages 415-422]
-
Naimian, F.
The Role of Solvent on Radiation Degradation and Antibacterial Activity of Chitosan Against Pectobacterium Carotovorum [Volume 23, Issue 4, 2010, Pages 305-310]
-
Najafi, M.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Najafi, M.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Nasiri, M.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Nazockdast, H.
Effect of the Compatibilizer Upon the Properties of Styrene-butadiene Rubber Organoclay Nanocomposites [Volume 23, Issue 1, 2010, Pages 65-74]
-
Nekoomanesh, M.
Process Conditions in Preparation of MgCl2 Adduct on Crystalline Structure of the Support in ZN Catalyst [Volume 23, Issue 2, 2010, Pages 171-179]
-
Nekoomanesh, M.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Nekoomanesh, M.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Nekoomanesh Haghighi, M.
The Effects of Temperature, Initiator and Stabilizer on Polymer Particle Size in Suspension Polymerization of Styrene [Volume 23, Issue 6, 2011, Pages 499-507]
-
Nemati, saeed
Effect of Rigid Polyurethane Foam Core Density on Flexural and Compressive Properties of Sandwich Panels with Glass/Epoxy Faces [Volume 23, Issue 1, 2010, Pages 3-16]
R
-
Rabea, A. Mohammad
Staining Behavior of an Anti-Graffiti Polyurethane Clear Coating against Accelerated Weathering Test [Volume 23, Issue 4, 2010, Pages 283-291]
-
Rafei, M.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Rasoulzadeh, Y.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Ravari, F.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Resalati, H.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Rezadoust, A.M.
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Roghani-Mamaqani, H.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Roghani-Mamaqani, H.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Rostami Daronkola, M.R.
Structure/Glass Transition Temperature Relationship of PVAc-b-poly(MA-co-MMA) Terpolymers with Theoretical and Topological Methods [Volume 23, Issue 2, 2010, Pages 133-144]
-
Rowshanzamir, S.
The Role of Reaction Parameter on Leaching of SiO2 Doped Nafion Membrane for Use in High Temperature PEM Fuel Cells [Volume 23, Issue 2, 2010, Pages 111-120]
S
-
Saadat-Monfared, Arash
A Study of UV Resistance of a Water-based Polyurethane Lacquer Containing Nano Ceria [Volume 23, Issue 6, 2011, Pages 441-454]
-
Sadrejahani, Mehdi
Microstructural Characterization of Aligned PAN Nanofibers Collected by Hot Air Flow in Electrospinning Method [Volume 23, Issue 4, 2010, Pages 271-281]
-
Safaei Javan, Raheleh
Dynamic Parameters in Preparing Chitosan Nanoparticles with Incorporation Method Using Novel Drug Delivery Systems [Volume 23, Issue 2, 2010, Pages 103-110]
-
Salami-Kalajahi, M.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Salami-Kalajahi, M.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Sanaeepur, H.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Saraei, M.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Semsarzadeh, M.A.
Structure/Glass Transition Temperature Relationship of PVAc-b-poly(MA-co-MMA) Terpolymers with Theoretical and Topological Methods [Volume 23, Issue 2, 2010, Pages 133-144]
-
Shahedifar, V
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Shakeri, A.
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [Volume 23, Issue 1, 2010, Pages 29-39]
-
Sheikhi Mehrabadi, Z.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Shojaosadati, S.A.
Enhancement of Poly(β-hydroxybutyrate) Production from Methanol by Methylobacterium Extorquens Using Mixed Substrates [Volume 23, Issue 5, 2011, Pages 397-404]
-
Shokrieh, M.M.
Simulation of Pultrusion Manufacturing Process of Glass/Polyester Composites [Volume 23, Issue 4, 2010, Pages 323-333]
-
Solhi, L.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Soltani, S.
Finite Element Analysis and Footprint Determination of a Bias Truck Tire under Vertical Static Load Using Global/Local Method [Volume 23, Issue 3, 2010, Pages 247-254]
-
Soltani, S.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Soroush, A.
The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration
Composite Membranes Based on Polyether Sulfone [Volume 23, Issue 3, 2010, Pages 213-222]
T
-
Tabrsa, T.
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [Volume 23, Issue 1, 2010, Pages 29-39]
-
Taghdir, E.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Taghizadeh, S.Mojtaba
Dynamic Parameters in Preparing Chitosan Nanoparticles with Incorporation Method Using Novel Drug Delivery Systems [Volume 23, Issue 2, 2010, Pages 103-110]
-
Tasoji, M.
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [Volume 23, Issue 1, 2010, Pages 29-39]
-
Tavakoli, M.
Effect of the Compatibilizer Upon the Properties of Styrene-butadiene Rubber Organoclay Nanocomposites [Volume 23, Issue 1, 2010, Pages 65-74]
V
-
Vasheghani-Farahani, E.
Enhancement of Poly(β-hydroxybutyrate) Production from Methanol by Methylobacterium Extorquens Using Mixed Substrates [Volume 23, Issue 5, 2011, Pages 397-404]
-
Vasheghani Farahani, E.
The Effects of Temperature, Initiator and Stabilizer on Polymer Particle Size in Suspension Polymerization of Styrene [Volume 23, Issue 6, 2011, Pages 499-507]
Y
-
Yousefi, A.A.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
Z
-
Zanjirian, E.
Single Vacuum Bagging and Autoclave Curing System Influence on Physical and Mechanical Properties of Phenolic Composites [Volume 23, Issue 6, 2011, Pages 509-518]
-
Zare Mehrjerdi, N.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Ziaee, F.
Microstructural Study on Polyvinyl Chloride by One and Two Dimensional Nuclear Magnetic Resonance Spectroscopy Methods [Volume 23, Issue 4, 2010, Pages 311-321]
-
Ziaee, Farshid
Microstructural Investigation and MolecularWeight Determination of 1, 2-Polybutadiene by Nuclear Magnetic Resonance Spectroscopy [Volume 23, Issue 5, 2011, Pages 359-370]
-
Zohuri, G.H.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Zohuriaan-Mehr, M.J.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Zohuriaan-Mehr, M.J.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
Your query does not match with any item